Ingiant solid shaft slip ring for engineering machinery
DHS024-24 |
|||
The main parameters |
|||
Number of circuits |
24 |
Working temperature |
“-40℃~+65℃" |
Rated current |
can be customized |
Working humidity |
<70% |
Rated voltage |
0~240 VAC/VDC |
Protection level |
IP54 |
Insulation resistance |
≥1000MΩ @500VDC |
Housing material |
Aluminum Alloy |
Insulation strength |
1500 VAC@50Hz,60s,2mA |
Electrical contact material |
Precious metal |
Dynamic resistance variation |
<10MΩ |
Lead wire specification |
Colored Teflon insulated & tinned stranded flexible wire |
Rotating speed |
0~600rpm |
Lead wire length |
500mm + 20mm |
|
|
|
|
All of the above can be customized except (Insulation resistance. Insulation strength. Dynamic resistance variation), if there is no suitable standard products, can be customized according to your requirements
Product drawing:
High-quality encapsulated miniature slip rings for combined power and signal transmission for use in space-critical applications. Mechanical and electrical specifications can be adapted according to individual requirements.
Installation of Capsulated Slip Rings
We have made the installation of the capsulated miniature slip rings as user-friendly as possible. The slip ring is attached to the flange of the housing with the pre-drilled holes at the desired position. The flange can be designed as rotor flange or stator flange and the included mounting holes can also be customized. Make sure that this position is always exactly in the center of the rotation axis. Slight eccentric movements can still be intercepted. Larger deviations may cause mechanical stress on the ball bearing, which may have a negative effect on the service life. The colors of the incoming and outgoing cables are identical. Mix-ups are impossible. After installation of the slip rings and connection of the current-carrying lines on both sides, the slip ring is ready for use.
Our advantage:
Copyright @ 2019 JiuJiang Ingiant Technology Co.,Ltd All Rights Reserved.